Proto-2

Reckless Experimentation Audio LLC

Eurorack Proto 2 Breadboard Module

Have and idea for a module and need to prototype it? Then this is for you!

This module contains a 800 point breadboard, mounted to a laser cut Delrin face plate.

Face plate can easily be cut or drilled to allow for customization.

Includes are Eight 1/8” mono jacks, and Four 100K single turn potentiometers.

These components have 24 AWG leads that can reach any position on the breadboard.

Ground wires on mono jacks are common, as they usually are tried to the nearest ground bus.

This allows for neater breadboarding.

Standard 10 pin power connector mounted to left side of breadboard provides a -12V, +12V, and 2 Ground rails. Breadboard marked with red paint to signify power cable orientation. Breadboard features a split rail system, the power and ground rails on the right and left sides of the board are not internally connected. They can be connected using the supplied jumper kit, or used for user determined voltage supplies.

includes 140 piece jumper kit.

Width: 33 hp

Depth 2.25 inches

What's in the Bag?

<!-- @page { margin: 0.79in } p { margin-bottom: 0.1in; line-height: 120% } a:link { so-language: zxx } -->

Completely assembled module

Jumper Kit

12 inch 10 pin unpolarized power cable

Six M2.5 screws

<!-- @page { margin: 0.79in } p { margin-bottom: 0.1in; line-height: 120% } a:link { so-language: zxx } -->

Six M3 screws