Hi-Tom Lo-Tom Drum Module 1.0

Eurorack Hi-Tom Lo-Tom Drum Module 1.0

Need to add some beats?
Don't want a lot of complicated controls?
Then this module is for you.

Demo Video Toms



The module contains two independent drum sound generating circuits.
Circuits are turned to produce sounds similar to High Tom and Low Tom drums.
Based on a self excited Bridged-T Filter.
Takes 5 millisecond trigger pulse and outputs a drum sound.
Also compatible with gate signals (second drum sound produced when gate input is removed)

Two control knobs F and Q
F controls the frequency of the drum sound.
Q controls the sharpness.

Due to the nature of Bridge-T filters, the controls do not operate entirely independent of one another.

What's in the Bag?
Complete 100% tested module
12 inch 10 pin unpolarized power cable
Two M2.5 screws
Two M3 screws

Input impedance 100K ohm
Output impedance less then 1K ohm
Compatible with both 5V and 12V trigger pulses with an output impedance of 1K ohm.
Current consumption: +12V <10mA, -12V <10mA
compatible with +-15V systems.
Module has no built in polarity protection.