High Hats Eurorack Percussion Module Kit

Kit High Hats Eurorack Percussion Module . This build uses mostly SMT parts, and is not recommended for beginners

Completed module available here

Assembly Video:

The module contains two identical independent percussion sound generating circuits. Circuits are turned to produce sounds similar to a synth hi-hat cymbal. Based on a self excited Bridged-T Filter, with digital white noise and metal tones. Takes 5 millisecond trigger pulse and outputs a percussion sound.

Two control knobs D and M D controls the duration of the release of the generated sound, adjustable from a quick tap to a long roll off. M controls the mix of white noise and metal tones. 100 percent of either white noise or metal,or any mix in between can be made.

What's in the Bag?

Complete Kit to build this module

12 inch 10 pin unpolarized power cable

Two M2.5 screws

Two M3 screws

2 black nylon washers

Input impedance 100K ohm

Output impedance less then 1K ohm

Compatible with both 5V and 12V trigger pulses with an output impedance of 1K ohm.

Current consumption: +12V 25mA, -12V 15mA

compatible with +-15V systems.

Module is polarity protected.